PML L Series CONVENTION LATHE

機台-PML560Lx2000
機台-PML560Lx2000
機台-PML760Lx4300
機台-PML660Lx3300

Features:

  • Selective bed width: L series: 400mm.
  • Varied spindle bore diameters: L series: Ø85mm / Ø120mm (Option).
  • Thermal treated and precision ground alloy gears.
  • Durable reservior oil bath type cross slide (for S series)
  • Universal gearbox for both imperial and metric thread-conversion table also attached.
  • Tracks of cross slide and bed are well lubricated with lubrication pump (manual).
  • Overload device to ensure safety when operating.
  • Thermal treated Meehanite bed casting.
  • Wear-resistant phosphor bronze lead screw nuts.
  • One piece base for high rigidity and low vibration.
  • High-capacity coolant tank offers sufficient coolant output.
  • All series certified for CE
Model PML 560L Series PML 660L Series
Specifications 2240.2260.2280.22100.22120.22160 2640.2660.2680.26100.26120.26160
Swing Over Bed 560 mm (22") 660 mm (26")
Swing Over Cross Slide 340 mm  (13-1/3") 440 mm (17-1/3")
Center Hight 280 mm (11") 330 mm (13")
Center Distance (mm) 1000.1500.2000.2500.3300.4300 (40".60".80".100".132".172")
Swing Over Gap 788 mm (31") 890 mm  (35")
Bed Width 400 mm (15-3/4")
Spindle Nose ASA D1-8 / D1-11 (Opt.)
Spindle Bore 85 mm (3-1/3") / 120 mm (4-1/2") (Opt.)
Taper of Spindle Bore MT 7
Spindle speed  15~1500 rpm (12 steps)-spindle bore:85mm / 10~1000 rpm (12 steps)-spindle bore:120mm
Inch Threads Range 2~56 TPI
Metric Threads Range P0.5-14
Longitudinal Feeds Range 0.05~0.82 mm (0.002~0.032")
Cross Feeds Range 0.02~0.4 mm (0.001~0.0094")
Leadscrew Diameter 38 mm (1-1/2")
Leadscrew Pitch 4 TPI or 6 mm
Taper of Tail Center MT 5
Tail Spindle  Travel 165 mm (6-1/2")
Tail Spindle Diameter 85 mm (3-1/3")
Main Drive Motor 10HP (7.5KW) /
15HP / 6P (11KW. Opt.)
Coolant Pump 1/8HP (0.1KW)
Compound Rest Travel 200 mm (8")
Cross Slide Travel 375 mm (14-3/4")
Machine Dimension (cm)   L: 238.290.347.398.473.555
  W: 103
  H: 126
  L: 238.290.347.398.473.555
  W: 103
  H: 131
Packing Dimension (cm)   L: 270.315.361.410.485.588
  W: 115
  H: 196
  L: 270.315.361.410.485.588
  W: 115
  H: 196
Net Weight  (kgs) 2200.2550.2900.3150.3650.4860 2280.2630.2980.3230.3730.4940
Gross Weight  (kgs) 2300.2650.3050.3300.3800.5060 2380.2730.3130.3380.3880.5140
Model PML 760L Series PML 860L Series
Specifications 3040.3060.3080.30100.30120.30160 3340.3360.3380.33100.33120.33160
Swing Over Bed 760 mm (30") 830 mm (33")
Swing Over Cross Slide 540 mm (21-1/4") 610 mm (24")
Center Hight 380 mm (15") 415 mm (16")
Center Distance (mm) 1000.1500.2000.2500.3300.4300 (40".60".80".100".132".172")
Swing Over Gap 990 mm  (39") 1060 mm  (42")
Bed Width 400 mm (15-3/4")
Spindle Nose ASA D1-11 
Spindle Bore 120 mm (4-1/2")
Taper of Spindle Bore MT 7
Spindle speed  15~1500 rpm (12 steps)-spindle bore:85mm / 10~1000 rpm (12 steps)-spindle bore:120mm
Inch Threads Range 2~56 TPI
Metric Threads Range P0.5-14
Longitudinal Feeds Range 0.05~0.82 mm (0.002~0.032")
Cross Feeds Range 0.02~0.4 mm (0.001~0.0094")
Leadscrew Diameter 38 mm (1-1/2")
Leadscrew Pitch 4 TPI or 6 mm
Taper of Tail Center MT 5
Tail Spindle  Travel 165 mm (6-1/2")
Tail Spindle Diameter 85 mm (3-1/3")
Main Drive Motor 15HP / 6P (11KW)
Coolant Pump 1/8HP (0.1KW)
Compound Rest Travel 200 mm (8")
Cross Slide Travel 375 mm (14-3/4")
Machine Dimension (cm)   L: 238.290.347.398.473.555
  W: 103
  H: 137
  L: 238.290.347.398.473.555
  W: 103
  H: 141
Packing Dimension (cm)   L: 270.315.361.410.485.588
  W: 115
  H: 196
  L: 270.315.361.410.485.588
  W: 115
  H: 196
Net Weight  (kgs) 2360.2710.3060.3310.3810.5020 2410.2760.3110.3360.3860.5070
Gross Weight  (kgs) 2460.2810.3210.3460.3960.5220 2510.2860.3260.3510.4010.5270

* The above specifications subject to change without prior notice.

Standard Accessories Optional Accessories
Tool Box 1pc Rapid traverse 
Centers 2pcs Chuck guard
Safety pin 1pc Change gear for D.P and module thread
Screw wrench for cutter setting 1pc   5C lever collet closer
Back plate 1pc Driving plate
Coolant system 1set Quick change tool post
4-way tool post 1set Digital readout 
Auto-feed stopper ring  1set Hydraulic copying machine
Center sleeve 1pc ID/OD ginder
Levelling pads 1set  
TOP